Machine Park

The technical foundation of precise manufacturing.

Our equipment for wire preparation, electrical testing, strength inspection, imaging and auxiliary production.

Machines and equipment

Search machines and equipment

Filter by process

Showing 11 of 11 items

01 · Wire cutting and stripping

Komax Kappa 320
Technical specifications
- Wire cross-section: 0.05–10 mm² (AWG 30–7).
- Maximum diameter: 10 mm (0.4 in).
- Length correction repeatability: ± (0.2% + 1 mm / 0.04 in).
- Flat cable processing: optional 12 mm (0.47 in).
- Cable length range: 1–800,000 mm (0.039 in–874.9 yd).
- Short cable length: optional 30 mm.
- Maximum wire feed speed: 4.0 m/s (157.5 in/s).
- Stripping: full stripping.
View technical sheet
02 · Conductor preparation and stripping

Schleuniger B240
Technical specifications
- Material diameter: 9 mm (0.35 in).
- Conductor cross-section: 0.013–13 mm² (36–6 AWG).
- Strip length: 39 mm (1.53 in).
- Pull length: 40 mm (1.57 in).
- Dimensions (L × W × H): 521 × 132 × 317 mm (20.51 × 5.19 × 12.48 in).
View technical sheet
03 · Electrical cable testing

Cirris EasyTouch Pro (512 points)
Technical specifications
- Test points: 512.
- Low voltage: maximum 4 V; current: 3 µA–6 mA.
- Resistance and four-wire measurement information is preserved in the original technical sheet.
- High voltage: 50–1500 VDC, ±5% ±5 V; optional 2000 VDC or 50–1000 VAC.
- Current limit: 0.1–1.5 mA.
- Maximum capacitance per net: 150 nF at 300 VDC; 90 nF at 500 VDC; 45 nF at 1000 VDC; 30 nF at 1500 VDC; 9.5 nF at 1000 VAC.
- HV energy limit: 35 mJ. HV charge limit: 45 µC.
View technical sheet
04 · Automatic crimp strength testing

IMADA ACT-1000N
Technical specifications
- Capacity: 1000 N.
- Performs strength testing of crimped terminals at the press of a button to reduce the time and effort required for harness testing.
View technical sheet
05 · Digital microscope

IGMOD MIC-08
Technical specifications
- 2 MP camera with 4× optical zoom.
- 12–132× magnification on a 22-inch screen.
- FHD image with 1080p high-resolution output.
- Frame rate: 60 fps.
- Focusing distance up to 220 mm.
View technical sheet
06 · Sleeve cutting

IGMOD Q-6100T
Technical specifications
- Sleeve cutting; blade spacing: 10 mm.
- Cutting length: 0.1–99,999 mm.
- Maximum cable diameter: 7 mm.
- Cutting width: 100 mm.
- Cutting speed (100 mm): 60 pieces/minute.
- Power supply: 220 V.
- Dimensions: 350 × 250 × 320 mm. Weight: 25 kg.
View technical sheet
07 · Label and cable marking

Brady i7100-300-EU-PWID
Technical specifications
- High-volume printing for aerospace, defense, public transport, electronics, automotive, logistics, electrical, voice/data communication and laboratory applications.
- Printing on sleeves, non-adhesive labels, labels, tapes and cable markers.
- Wide material range, including difficult-to-print materials.
- Automatic label peeling from the carrier with the peeler configuration.
- Accurate, clear printing on labels as small as 4 mm.
- Touchscreen printer settings.
- Supplied with Brady Workstation software.
View technical sheet
08 · Semi-automatic digital dispensing

BY-983A
Technical specifications
- Control system: digital / single-chip control. Operation: pneumatic dispensing.
- Dispensing time: 0.01–30 seconds. Minimum volume: 0.001 ml.
- Dispensing speed: up to 800 doses/minute. 16 dispensing modes.
- Repeatability: ±0.4%.
- Power supply: 110–220 VAC. Power: 30 W.
- Control: manual switch / foot pedal.
- Vacuum function available. Precisely adjustable air pressure.
- Precision dispensing of adhesive, epoxy resin, silicone, flux, paint and similar fluids for electronic, electrical, PCB and industrial applications.
View technical sheet
09 · Engraving, mini grinding and surface preparation

Engraving Set
Technical specifications
- Multi-purpose engraving and mini grinding set.
- Rotary tool for engraving, grinding, cutting, sanding and surface processing.
- Accessories: engraving and grinding bits, cutting discs, abrasives and auxiliary tools.
- Harness production, electronic assembly, prototyping, mechanical processing and maintenance.
- Cable duct and housing processing, plastic deburring, small-part adjustment and pre-assembly surface preparation.
- Precision processing of plastic, metal, wood and similar materials.
- Workshop, maintenance, prototype and auxiliary production work.
View technical sheet
10 · Digitally controlled solder pot

Pro’sKit SS-552B
Technical specifications
- Electronic temperature control; electrically heated solder melting.
- Operating temperature: 100–550 °C. Power: 200 W.
- Power supply: 220–240 VAC, 50/60 Hz.
- Solder capacity: 0.5 kg. Pot: Ø50 × 35 mm.
- Time to maximum temperature: approximately 10 minutes.
- Thermal insulation: ceramic tube and aluminosilicate.
- Adjustable electronic temperature control.
- Lead and lead-free solder melting and tinning.
- Electronic production, PCB assembly, wire tinning, soldering and industrial applications.
- Dimensions: 150 × 90 × 60 mm.
View technical sheet
11 · 4K imaging and visual quality inspection

Sony 4K Digital Microscope
Technical specifications
- Sensor: Sony 1/1.8-inch CMOS.
- Image resolution: 3840 × 2160 pixels (4K Ultra HD), 8.3 MP.
- Video output: 4K Ultra HD. Camera: digital microscope camera.
- Image transfer: HDMI / USB (may vary by model).
- Photo and video recording.
- Electronic boards, PCB, soldering, phone repairs, precision mechanical parts, metal surfaces, jewelry and industrial quality inspection.
View technical sheet